Produced from birch and alder wood. The internal layers may be made of 100% deciduous wood veneers (homogenous plywood) or deciduous and pine veneers (combined plywood). Produced on the basis of urea-formaldehyde resin (interior joint) for use in dry conditions (according to PN-EN 636, class EN 636-1) in E1 sanitary attestation or with the reduced formaldehyde emission (CARB - phase 1 and 2).
more »
Produced from birch and alder wood. The internal layers may be made of 100% deciduous wood veneers (homogenous plywood) or deciduous and pine veneers (combined plywood). Produced on the basis of melamine-formaldehyde resin (water-resistant joint) for use in humid conditions (according to PN-EN 636, class EN 636-2), or phenol-formaldehyde resin (water-resistant joint) for use in exterior conditions (according to PN-EN 636, class EN 636-3) in E1 sanitary attestation.
more »
Produced from pine wood. The internal layers may be made of 100% pine wood veneers (homogenous plywood) or deciduous and pine veneers (combined plywood). Produced on the basis of urea-formaldehyde resin (interior joint) for use in dry conditions (according to PN-EN 636, class EN 636-1) in E1 sanitary attestation or with the reduced formaldehyde emission (CARB).
more »
Produced from pine wood. The internal layers may be made of 100% pine wood veneers (homogenous plywood) or deciduous and pine veneers (combined plywood)). Produced on the basis of melamine-formaldehyde resin (water-resistant joint) for use in humid conditions (according to PN-EN 636, class EN 636-2) in E1 sanitary attestation.
more »
Produced from beech timber from Southern Poland. The internal layers may be made of veneers of different kinds of wood. It is available as internal - based on urea-formaldehyde resin for use in dry conditions (according to PN-EN 636, class EN 636-1), or based on melamine-formaldehyde resin (water-resistant joint) for use in humid conditions (according to PN-EN 636, class EN 636-2) in E1 sanitary attestation and as external, based on phenol-formaldehyde resin for use in exterior conditions (according to PN-EN 636, class EN 636-3).
more »
Produced on the basis of internal hard plywood, homogenous or combined, from birch and alder wood, double overlaid with natural veneers (e.g. ash, maple, beech, oak or exotic). Produced on the basis of urea resin for use in dry conditions (according to PN-EN 636, class EN 636-1) in E1 sanitary attestation.
more »
Produced on the basis of external hard plywood, homogenous or combined, from birch and alder wood, double overlaid with natural veneers (e.g. ash, maple, beech, oak or exotic) for use in humid conditions - on the basis of melamine-formaldehyde resin (according to PN-EN 636, class EN 636-2), or phenol-formaldehyde resin for use in exterior conditions (according to PN-EN 636, class EN 636-3) in E1 sanitary attestation.
more »
Produced on the basis of external hard plywood, homogenous or combined, from birch and alder wood, double overlaid with phenolic film, with the use of the most innovative Finnish technology with all the four edges protected - with acrylic paint. Phenolic film is ecological paper saturated with phenolic resin. There is a wide range of films of various grammages in application (e.g. 60/145, 60/167) that are resistant to water, alkalies, oils, lubricants, etc.
more »
Produced on the basis of external hard plywood, homogenous or combined, from birch and alder wood, double overlaid with phenolic film, with the use of the most innovative Finnish technology, with one or double-sided imprint of net, providing antislip surfaces and with all the four edges protected - with acrylic paint. Phenolic film is ecological paper saturated with phenolic resin. There is a wide range of films of various grammages in application (e.g. 60/145, 60/167) that are resistant to water, alkalies, oils, lubricants.
more »
Produced from hard wood (birch and alder), internal (MR) based on urea-formaldehyde resin for use in dry conditions - according to PN-EN 636, class EN 636-1, of specially improved structure. The external and internal layers do not have any direct flaws (defects disturb the process of laser cutting). Produced in E1 sanitary attestation or with the reduced formaldehyde emission (CARB).
more »
Produced on the basis of softwood strips from pine or deciduous wood, double overlaid with deciduous or pine facing boards, based on melfemo resin for use in humid conditions (according to PN-EN 636, class EN 636-2), or urea-formaldehyde resin for use in dry conditions (according to PN-EN 636, class EN 636-1). Blockboards are produced as 3-ply.
more »
Produced on the basis of external homogenous hard plywood, based on phenol-formaldehyde resin for use in exterior conditions (according to PN-EN 636, class EN 636-3) in E1 sanitary attestation. Beton plywood is double overlaid with PPL (polypropylene of 1,5 mm thickness) - in grey colour, with the use of the most innovative Finnish technology with all the four edges protected with acrylic paint. The external layer PPL is an ecologically safe material, subject to recycling, characterised by good resistance to UV radiation and very high resistance to damages.
more »
Produced on the basis of external homogenous or combined hard plywood, based on phenol-formaldehyde resin for use in exterior conditions (according to PN-EN 636, class EN 636-3) in E1 sanitary attestation, with centrally placed cork or rubber core 3 mm thick. Plywood with cork or rubber effectively reduces vibrations and sounds generated, for instance, by motor's work.
more »
Produced on the basis of external plywood on the melamine adhesive for use in humid conditions (according to PN-EN 636, class PN-EN 636-2) in E1 sanitary attestation, and phenolic for use in external conditions (according to PN-EN 636, class PN-EN 636-3) in E1 sanitary attestation. Plywood with aluminium core is produced in two kinds: homogenous deciduous or pine and combined deciduous and pine. The aluminium core of 0,3 mm thick is internally placed.
more »
Wood garnish strips are produced from internal hard plywood based on urea-formaldehyde resin, for use in dry conditions - according to PN-EN 636, class EN 636-1, in E1 sanitary attestation or on the reduced formaldehyde emission (CARB). The strips are obtained through the cutting of deciduous plywood, birch or alder, of a special structure. Strips may be overlaid with garnish foils. The type of foil, its dimension and thickness, are customized as required by the customer.
more »
In our offer we also have such kinds of natural veneers as: American cherry, American oak, American walnut, Carolina pine tree, anegre, Finnish birch, Canadian maple, sapele striped, sapele flader, both fat, as well as circumferentially cut. Natural veneers are used for overlaying furniture elements of various board materials (MDF, CHIPBOARDS, PLYWOOD).
more »
Plywood with joing by feather & groove
Plywood with joining by feather and groove have milling edge, which enables faster and more precise assembly of plates in large segments and in the same time creating flat operating surfaces. They are applied to obtain precise joint in roof constructions and semi trailers. Two kinds of plywood are used with join by feather and groove...
more »
Plywood with this joining system is applied to obtain permanently joined large board formats, with a special method fibrewise to plywood face veneers. Thanks to this system of joint, boards in lengths up to 7000 mm can be obtained. Scarf-Joint boards have similar resistance to standard boards.
more »
We produce fibre mats from natural glue contact-joined veneers, in dimensions customized as required by the customer - max length up to 3100 mm - max width up to 1800 mm. Veneer fibre mats are mainly produced from beech, oak, alder, pine veneer and other kinds of wood e.g. ash, American walnut, American cherry, Finnish birch and other exotic types. High quality and low price guaranteed.
more »